today I bent a piece of 1/4" rod into a zigzag, clamped it into my drill with the battery removed and a voltmeter hooked up to the battery terminals. I was able to crank it up to 5VDC easily, and by going as fast as I could, could sometimes break 10V. this was all with no load, though. plus I had to hold the trigger all the way in.

still can't figure a way of driving any of my available wheeled devices with the drill. can't get enough of a "bite" against the wheels with anything that doesn't also chew it up.

Back to blog or home page

last updated 2014-04-14 02:24:30. served from tektonic